Monroe-electronics Charge Plate - Analyzer - model 300 Manual de usuario descargar pdf (Pagina 3)

3

Section 1

Specifications

All specifications are referred to plate voltage unless otherwise specified.

Charger ±1,100 volts (minimum), selectable polarity

Fieldmeter

Range: 0 to ±1,300 volts on display

0 to ±1,800 volts at analog output

1 volt resolution

Accuracy: ±2% of reading, ±2 volts, + zero offset, typical

Analog Output: 1/1000

of the plate voltage, ±3%, typical

Bandwidth: 6 Hz

Timer

Range: 0.1 second to 999.9 seconds

Accuracy: 0.1 second

Resolution: 0.1 second

Trip Points

Start Voltage: 1000 volts

Stop Voltage: Settable from 10 volts to 990 volts in 1-volt increments

Charge Plate

Size: 6 inches x 6 inches (15 cm x 15 cm)

Capacitance: 20 pF ±10%

Self-Discharge: Less than 100 volts within 5 minutes (<60% R.H.)

Power Requirements: 100 VAC to 220 VAC nominal line voltage; less than 5 watts

Battery Life: >8 hours per charge

Dimensions: 6-3/8” W x 6” H x 8-3/4” D (162mm x 152.4 mm x 223 mm)

Weight: 5.2 pounds (2.4 kg)

1 2 3 4 5 6 7 8 ... 50 51

Sin comentarios

Monroe-electronics Charge Plate - Analyzer - model 300 Manual de usuario Pagina 3